STEWART SW Logo WARNER

Home - Catalog Index - Product Lines - Distributors - Tech Support - Contacts

Thick Film Pressure Senders

All standard pressure senders are 240 ohms at no psi and 33.5 ohms at full rating (see specifications below for limits).
Sender w/Stud --- Dual Sender w/Stud --- Sender w/PackardTM Connector --- Specifications
Male PackardTM Connector Assembly - Kit 82891
If you want guidance in selecting a Pressure Sender check our "How to select a Pressure Sender" (Opens new window)
Pressure Senders with Stud Termination (top)
Kit Pressure Characterisitcs Resistance
82504-F 15 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms
279D 60 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms
279A 80 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms
279B-F 100 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms
279C 150 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms

Dual Pressure Senders with Stud Termination (top)
Kit Pressure Characterisitcs Resistance
82514 80 psi Cannot be used with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 120 Ohms
82501 100 psi Cannot be used with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 120 Ohms

Pressure Senders with PackardTM Connector (top)
Kit Pressure Characterisitcs Resistance
82895 60 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms
82892 80 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms
82893 100 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms
82894 150 psi For use with single gauge, standard pipe thread 1/8", includes adapter for 1/4"; additional adapters available 240 Ohms

SPECIFICATIONS:

Pressure Resistance (Nominal) Limits
0 psi (0 Kps) 240 Ohm 229.0-242.5
Full Rating 33.5 Ohm 27.0-43.0
Type: diaphragm, thick film rheostat
Voltage: 12 volts is normal operating voltage. Can be used in circuits up to 36V with voltage adapter.
Weight: 5.5 ounces / 56 grams
MATERIALS AND FINISHES:
Cover: steel, zinc dichromate finish
Flange and stud assembly: steel, bright zinc
Terminal stud: brass, white nickel
Hex nut: brass
Lock washer: phosphor bronze
Flat washer: brass
APPLICATION SPECIFICATIONS:
Mounting position: any orientation permissible
Ambient temperature range:
--Operating: -40°F through 300°F / -40°C through 149°C
--Storage: -40°F through 300°F / -40°C through 149°C
(top)

Home Catalog Contacts Distributors Tech Support Feature Company Info

Copyright 2005 - Maxima Technologies
1811 Rohrerstown Road, Lancaster, PA 17601
PH: 717-581-1000 Fax: 717-569-6372
Questions about this website? Contact web@stewartwarner.com