Accessories

Genuine Stewart Warner

We are your source for genuine Stewart Warner light kits, mounting panels, 24-to-12-volt voltage adapters, ammeter shunts, and a selection of warning devices (lights and buzzers.)

Finish the job with genuine Stewart Warner parts!

Temperature Bulb Thread Adapter: P/N 82574

Type: Mechanical temperature bulb thread adapter
ID: 5/8″-18
OD: M18 x 1.5

For further information and to locate a dealer

Temperature Bulb Thread Adapter: P/N 82573

Type: Mechanical temperature bulb thread adapter
ID: 5/8″-18
OD: M16 x 1.5

For further information and to locate a dealer

Temperature Sender Thread Adapter: P/N 822651D

Type: Temperature sender thread adapter
ID: 1/8″ NPTF
OD: 1/2″ NPTF

For further information and to locate a dealer

Mechanical Gauge Tubing Kit: P/N 82553-F

Type: Mechanical pressure gauge tubing kit
Length: 72″ (6 feet)

For further information and to locate a dealer

Temperature Sender Thread Adapter: P/N 822650D

Type: Temperature sender thread adapter
ID: 1/8″ NPTF
OD: 3/8″ NPTF

For further information and to locate a dealer

Temperature Bulb Thread Adapter: P/N 72446-F

Type: Mechanical temperature bulb thread adapter
ID: 5/8″-18
OD: 3/8″ NPTF

For further information and to locate a dealer

Right Angle Adapter for Flexshafts, P/N 407010-F

Drive tip: 0.104” square, Thread: 5/8”-18.

For further information and to locate a dealer

Right Angle Adapter for Flexshafts, P/N 411335-D

Drive tip: 0.104” square, Thread: 5/8”-18.

For further information and to locate a dealer

Hand-Held Tachometer 3″ Extension Shaft: P/N 412850-1

Type: 3-inch extension shaft.

For further information and to locate a dealer

3 Screw HourmeterSurface Mounting Bracket: P/N 486-M

Type: 3 screw hourmeter

For further information and to locate a dealer

Fuel Sender Install Kit: P/N 366LP-F

Type: Fuel Sender Accessory
Includes: Flange, Gasket, 5 Washers, 5 Screws

For further information and to locate a dealer

Quick Disconnect Adapter, P/N 366ADB

For further information and to locate a dealer

Mechanical Gauge Tubing Kit: P/N 366HM-F

Type: Mechanical pressure gauge tubing kit
Length: 192″ (16 feet)

For further information and to locate a dealer

Hand-Held Tachometer Rubber Tip: P/N 96798

Type: Cone tip

For further information and to locate a dealer

Hand-Held Tachometer Rubber Tip: P/N 96799

Type: Cup tip

For further information and to locate a dealer